This is the simplest way to train coherence on 2.0 or later software. It does not use anything except the built-in sound processor. It is set up this way in the built-in protocol "Peak" which also uses animations, etc. But the following procedure will manually set up a simple...

Install BioExplorer Software.  Use the software sent to you by BrainMaster Open BioExplorer Click on the BioExplorer menu then Devices (Top left of screen on the file menu) Click on Add Under New Device choose BrainMaster+, Click OK Note: The

The Flash Player in BrainMaster allows for the use of games created using Macromedia

To use games in BrainMaster do the following: Run BrainMaster Software Select folder Choose Run The Next Session Click on the Window button There are several games to choose from. To run a game simply click on the corresponding button

You can find the instruction manuals by opening the BrainMaster software, double click on the BrainMaster Icon.  Then in the Setup/Home Screen at the bottom there is a button that says "Product Manuals."  This will then open another window with a list of files to help you...

Make sure you are getting points.  If not, check the "not getting points" parts of the troubleshooting guide. Make sure that the Reward Sounds is checked. In the Training Control Screen click on Sound Make sure Reward Sounds is checked. If you still do not...

Yes.  There were some issues with Vista when it first came out because we had not seen it to do any field testing.  Now if you do the latest update for the software from our website you will be able to run your BrainMaster with no problem. You do NOT need to install WinDVD when using a...

Instructions for Puzzle Double click the puzzle icon in the puzzle folder. You will the main screen, a square covered with one hundred thirty small blue squares.  At the bottom of the screen are the four control buttons 1) Reset  (Alt R)  Makes all the blue squares...

This may occur when you try to use a wideband 2.5 amplifier with 2.0 software. You must use 2.5 software with wideband amplifiers

Make sure that you are using BrainMaster 2.5 or above and have the Multi-Media Pack or a new login passkey from BrainMaster to allow Somatic Vision extensions. If you need to upgrade or purchase a new passkey contact: BrainMaster Technologies (440) 232-6000

Check the serial cable connection. Make sure that both ends are securely fastened to the BrainMaster and your Computers

Windows 95, 98, NT, and ME 1.9 2.0 2.5 2.5SE Windows 2000 and XP 2.5 2.5SE (recommended over 2.5) 3.0 Windows Vista 3.0 2.5SE will operate, but with some quirks, like inconsistent indications of the saved settings. As always, make sure

Try switching to a different coherence type. On Feedback Control, if "Training/Similarity" is selected, select "Assessment/Pure" instead. The "Pure" coherence is insensitive to phase, and beta waves are often out of phase. The "Training" coherence is...

This message is caused by the inproper closing of the Training Control Screen. When the Training Control Screen is improperly closed, the BrainMaster amplifier still thinks it is in the last session. When you attempt to start a new session you will get the Buffer Overflow error message. To close...

To fix this problem Turn up the hardware acceleration in Display Properties. Right click on Desktop Click on properties on the menu that appears. Click on Settings tab Click on Advanced button Click on

This manual will provide helpful hints for performing basic and advanced operations as well as troubleshooting.

Are you receiving sound upon windows start up? Make sure your speakers are turned on and plugged into the proper jack in the sound card Click Start, Control Panel, then double click on Sounds and Audio Devices (Classic View)

Yes. Inner tube and particle editor will work with Brainmaster 3.0 for Atlantis. However like with the 2.5 version, you still need the somatic vision / spare 12 passkey. Make sure to ask for this special key when ordering.       To find out if you have

When BioExplorer is opened, there is the Toolbar at the top which has the options: BioExplorer, Edit, Session etc...   Under that are radio buttons indicating "play" (a green arrow), "Record" (a red dot) etc.   And just under that is an area that has a black...

When you get an MFC or other error, or nothing at all after pressing Run the Next Session, it could be a number of things.   One possible fix is: Open 2.5SE and run the Demo 1 folder  for a minute or so, then close 2.5SE and run 3.0. you shouldn't see the error any...